Discounted Shipping on All Orders.
Boxer Mod YiHi200W DIY Kit with SX350J-V2 Temperature Control Chip

$189.95

Boxer Mod YiHi200W DIY Kit with SX350J-V2 Temperature Control Chip

$189.95

 

Boxer Mod YiHi200W DIY Kit with SX350J-V2 Temperature Control Chip is designed specifically for professional and high-end vapers.  This device is powered by the YiHi SX350J-V2 Mini processor which provides intelligent power regulation with temperature control.  Precise Temperature Control, upgradable, Graphic user interface operation, etc…  The Boxer is a small but extremely potent device, designed to provide a balance of both power and convenience.

Made of nylon plastic, the device is strong but yet light. The battery cover is press-fitted and can be conveniently opened.  Connecting the device to your computer via the USB cable with allow for chip upgrades by YiHi.

** THIS IS A DO IT YOURSELF KIT.  IT IS ONLY THE PARTS THAT YOU MUST SOLDER, ASSEMBLE & PROGRAM YOURSELF.  IT DOES NOT COME WITH THE BOXER WARRANTY, BUT ONLY THE WARRANTY FROM YIHI ON THE CHIPSET.  **

* For the Fully Assembled Mod Please see HERE

** Firmware Download **

  • Boxer Edition 200W V2.208  HERE
  • Boxer Edition 150W V2.36 (** For Original SX350J-v1 ONLY) HERE

Kit Includes:

  • Boxer Enclosure — Body, Door and Battery Cover
  • YIHI SX350J-V2 chip
  • Spring Loaded 510 connector
  • 4x battery contacts
  • 6x M1.6×5 Screws
  • 16 gauge wire
  • Heat Shrink Tubing
  • Boxer Vape Band (Color Coordinating)
  • USB Cable
  • Boxer Tube
  • Basic Boxer DIY Instructions

* Availability *

  • Please allow 1-2 days processing for new orders 
Clear
SKU: N/A. Categories: , .

Boxer Mod YiHi200W DIY Kit with SX350J-V2 Temperature Control Chip is designed specifically for professional and high-end vapers.  This device is powered by the YiHi SX350J-V2 Mini processor which provides intelligent power regulation with temperature control.  Precise Temperature Control, upgradable, Graphic user interface operation, etc…  The Boxer is a small but extremely potent device, designed to provide a balance of both power and convenience.

Made of nylon plastic, the device is strong but yet light. The battery cover is press-fitted and can be conveniently opened.  Connecting the device to your computer via the USB cable with allow for chip upgrades by YiHi.

* For the Fully Assembled Mod Please see HERE

** Firmware Download **

  • Boxer Edition 200W V2.208  HERE
  • Boxer Edition 150W V2.36 (** For Original SX350J-v1 ONLY) HERE

Features:

  • Powered by the 3rd generation YiHi SX350J-V2 mini processor
  • Variable Wattage & Variable Joule supporting Ni/Ti/SS…
  • New innovative technology: Temperature Coefficient of Resistance, compensate temperature and SXi-Q Controller
  • Customize your own taste
  • Temperature Control. Anti-dry burning technology
  • Output Joule: 10J-75J, 200°F-580°F /100℃-300℃
  • Maximum Watts: 200W and future upgrades will be available
  • Dual Battery 200W regulated based on 2 x 18650
  • Output Voltage: 1.0 – 9.5 volts
  • Resistance: 0.05 – 0.30 ohms (Joule) Mode; 0.15 – 3.0 ohms (Power Mode)
  • Buck-Boost&Boost, DC-DC Converter
  • Taste modes: Powerful+, Powerful, Standard, Soft, SXQ S1-S5
  • USB for software updates only, takes two (2) 18650 Batteries
  • Plastic Nylon Body
  • Ergonomic design
  • Joules Display
  • Rotary Display (Auto-Flip)
  • Gravity Sensor System (Adjust the wattage without the need of the +/- buttons)
  • Upgradable firmware
  • Graphic User Interface
  • Reverse Polarity, Output short, Low resistance, Low battery Voltage and Overheat protection
  • OLED 0.91″ Screen
  • Dimensions: 80.5mm x 41.5mm x 39.2mm (3.17″ x 1.63″ x 1.54″ approx.)

** New Grey material is now offered.  This new grey is now using a grey powder instead of white which eliminates the need for dying as the color is now throughout the material.  This results in a print which is resistant to aging, friction and light.  Color will last longer and be more vibrant.  Touching, exposure to sunlight and polishing will not effect the color.

Kit Includes:

  • Boxer Enclosure — Body, Door and Battery Cover
  • YIHI SX350J-V2 chip
  • Spring Loaded 510 connector
  • 4x battery contacts
  • 6x M1.6×5 Screws
  • 16 gauge wire
  • Heat Shrink Tubing
  • Boxer Vape Band (Color Coordinating)
  • USB Cable
  • Boxer Tube
  • Basic Boxer DIY Instructions

 

 

Color

Black, White, Blue, Grey, Red, Pink, Green, Orange, Yellow, Purple

Reviews

There are no reviews yet.

Be the first to review “Boxer Mod YiHi200W DIY Kit with SX350J-V2 Temperature Control Chip”

The Products contained on this site are intended for sale to adults 21 years or older.

If you are not legally able to purchase tobacco products in the state in which you live, please do not enter this site.