$189.95
Boxer Mod YiHi200W DIY Kit with SX350J-V2 Temperature Control Chip
$189.95
Boxer Mod YiHi200W DIY Kit with SX350J-V2 Temperature Control Chip is designed specifically for professional and high-end vapers. This device is powered by the YiHi SX350J-V2 Mini processor which provides intelligent power regulation with temperature control. Precise Temperature Control, upgradable, Graphic user interface operation, etc… The Boxer is a small but extremely potent device, designed to provide a balance of both power and convenience.
Made of nylon plastic, the device is strong but yet light. The battery cover is press-fitted and can be conveniently opened. Connecting the device to your computer via the USB cable with allow for chip upgrades by YiHi.
** THIS IS A DO IT YOURSELF KIT. IT IS ONLY THE PARTS THAT YOU MUST SOLDER, ASSEMBLE & PROGRAM YOURSELF. IT DOES NOT COME WITH THE BOXER WARRANTY, BUT ONLY THE WARRANTY FROM YIHI ON THE CHIPSET. **
* For the Fully Assembled Mod Please see HERE
** Firmware Download **
Kit Includes:
- Boxer Enclosure — Body, Door and Battery Cover
- YIHI SX350J-V2 chip
- Spring Loaded 510 connector
- 4x battery contacts
- 6x M1.6×5 Screws
- 16 gauge wire
- Heat Shrink Tubing
- Boxer Vape Band (Color Coordinating)
- USB Cable
- Boxer Tube
- Basic Boxer DIY Instructions
* Availability *
- Please allow 1-2 days processing for new orders
Boxer Mod YiHi200W DIY Kit with SX350J-V2 Temperature Control Chip is designed specifically for professional and high-end vapers. This device is powered by the YiHi SX350J-V2 Mini processor which provides intelligent power regulation with temperature control. Precise Temperature Control, upgradable, Graphic user interface operation, etc… The Boxer is a small but extremely potent device, designed to provide a balance of both power and convenience.
Made of nylon plastic, the device is strong but yet light. The battery cover is press-fitted and can be conveniently opened. Connecting the device to your computer via the USB cable with allow for chip upgrades by YiHi.
* For the Fully Assembled Mod Please see HERE
** Firmware Download **
Features:
- Powered by the 3rd generation YiHi SX350J-V2 mini processor
- Variable Wattage & Variable Joule supporting Ni/Ti/SS…
- New innovative technology: Temperature Coefficient of Resistance, compensate temperature and SXi-Q Controller
- Customize your own taste
- Temperature Control. Anti-dry burning technology
- Output Joule: 10J-75J, 200°F-580°F /100℃-300℃
- Maximum Watts: 200W and future upgrades will be available
- Dual Battery 200W regulated based on 2 x 18650
- Output Voltage: 1.0 – 9.5 volts
- Resistance: 0.05 – 0.30 ohms (Joule) Mode; 0.15 – 3.0 ohms (Power Mode)
- Buck-Boost&Boost, DC-DC Converter
- Taste modes: Powerful+, Powerful, Standard, Soft, SXQ S1-S5
- USB for software updates only, takes two (2) 18650 Batteries
- Plastic Nylon Body
- Ergonomic design
- Joules Display
- Rotary Display (Auto-Flip)
- Gravity Sensor System (Adjust the wattage without the need of the +/- buttons)
- Upgradable firmware
- Graphic User Interface
- Reverse Polarity, Output short, Low resistance, Low battery Voltage and Overheat protection
- OLED 0.91″ Screen
- Dimensions: 80.5mm x 41.5mm x 39.2mm (3.17″ x 1.63″ x 1.54″ approx.)
** New Grey material is now offered. This new grey is now using a grey powder instead of white which eliminates the need for dying as the color is now throughout the material. This results in a print which is resistant to aging, friction and light. Color will last longer and be more vibrant. Touching, exposure to sunlight and polishing will not effect the color.
Kit Includes:
- Boxer Enclosure — Body, Door and Battery Cover
- YIHI SX350J-V2 chip
- Spring Loaded 510 connector
- 4x battery contacts
- 6x M1.6×5 Screws
- 16 gauge wire
- Heat Shrink Tubing
- Boxer Vape Band (Color Coordinating)
- USB Cable
- Boxer Tube
- Basic Boxer DIY Instructions
You must be logged in to post a review.
Reviews
There are no reviews yet.